121⟩ Tell me what are the important points to be observed for fire prevention?
☛ Good house keeping
☛ No smoking
☛ Use of fire resistant paint
☛ Electrical safety
☛ Fire check doors
☛ Noked flame safety
☛ Separate storage of hazardous chemicals
Construction Safety
Home Construction Construction Safety
“Construction Safety related Frequently Asked Questions by expert members with job experience as Construction Safety. These questions and answers will help you strengthen your technical skills, prepare for the new job interview and quickly revise your concepts”
152 Construction Safety Questions And Answers
122⟩ Explain plant safety inspection by whom?
☛ Safety officer
☛ By line management personal
☛ By senior management personnel
☛ First line supervisor
☛ By maintenance engineers
☛ By workers
☛ By safety committee
☛ By statutory authorites
123⟩ Explain how many types of PPE?
There are two types of PPE
1. Respiratory
2. Non respiratory
Respiratory — Air supplied
— Air purified
Air supplied — Compressed air breathing apparatus set
Air purified — Cannisters gas mask
—- Chemical cartridges respirator
——– Surgical cotton mask
Dust filter mask (dust respirator)
124⟩ Tell me what is emergency planning?
Emergency planning can defined as a control measure. It can control the accidents safe guard people and provide information to media.
125⟩ Please explain control measures of radiography?
☛ Barricade the area
☛ Remove all un-necessary persons away from site
☛ Check radiation level with dosimeter
☛ Use lead shields
☛ Put a sign board
☛ Risk tissue damaged
☛ Use special filter glass
☛ Use lead coated aprons
126⟩ Explain what is lathe?
Lathe is an equipment use for cutting, threading, millingor facing etc.
127⟩ Explain me what is safety inventory system?
It is a safety date collecting technique and carried out to promote full employee co-operation condition in the implementation of the company’s safety surveys.
128⟩ Explain me what are the hazards in petroleum industry?
☛ Fire,
☛ Explosion,
☛ General hazards,
☛ Frostbite
129⟩ Tell me what is delegated work permit?
Delegated work permit used for areas requiring light control. Ex : Fabrication, yards – valid – 30 days
130⟩ Explain what are main provision in the factory act?
Health, safety, welfare, hours of work, employment, person, occupational disease, special provision and penalties and procedures.
131⟩ Tell me what precaution are necessary for protect of fires?
☛ 1. Buildings and plants shall be so laid out and roads, passage ways etc.
☛ 2. Doors and windows shall be located in suitable positions on all external walls of the building.
☛ 3. Smoking lighting or carrying matches are to be prohibited
☛ 4. Gas cylinders should not be stored near high flammable substances
☛ 5. Flammable liquids shall be stored in suitable containers with close fitting covers.
☛ 6. In every factory has to suitable fire fighting equipment
☛ 7. All fire fighting equipment shall be subjected to routine maintenance inspection and testing by proper trained persons.
☛ 8. Sufficient number of persons shall be trained in the proper handling of fire fighting equipment.
132⟩ Do you know what is ELCB?
It is protection of living beings under electro charging by fast isolation from the live conductor to avoid permanent disability or death.
133⟩ Explain me about fork lift truck?
☛ 1. Check breaks, lift tilt and tires.
☛ 2. Check the stability of load before moving it
☛ 3. Never leave your fork lift truck un-attend with motor running
☛ 4. Never park fork lift truck on passage way
☛ 5. Never drive with wet or greasy hands
☛ 6. Always drive with a safe speed and slow down at turning point
☛ 7. When driving without load forks about 6 inches above the floor or ground
☛ 8. Never operate trunk in gaseous area
☛ 9. Never carry a load so high that you can not head, If necessary operate truck in reverse
☛ 10. Avoid carrying lose materials on forks
☛ 11. Never allow one to go under elevated loads
☛ 12. Warn other employees to stand clear when staking or removing materials
☛ 13. Exhaust pipe should have flame arrestor
☛ 14. Fork should be lowered to the floor when the truck is unattended
☛ 15. Stay alert t all times
134⟩ Do you know what are the hazards in construction?
☛ 1. Fall of person from top and getting injured
☛ 2. Fall of objects from top and below person injury
☛ 3. Fall of materials from top and damaged
☛ 4. Person fall into excavated pit
☛ 5. Collapse of soil and below person get injury or may
☛ 6. Damage of UG cables and sewage pipe
☛ 7. Collapse of scaffolding and person fall from height, get injury
☛ 8. Electrical shock
☛ 9. Fire and explosion
☛ 10. Burn injury
☛ 11. Health and lung problems
☛ 12. Snakes bite
☛ 13. Poisonous gas
☛ 14. Foreign body in eye
135⟩ Tell me what is work at height?
Any work above 2 meters from ground is caused work at height.
136⟩ What is house keeping?
House keeping means not only cleanness but also orderly arrangement of operations, tools, equipment storage facilities and suppliers.
137⟩ Please explain control measures of vehicles permit?
☷ Fitted spark arrester
☷ Speed 30 km./hours
☷ Proper warring lights
☷ No over load
☷ Correct parking
☷ Pollution check
☷ 3rd party inspection
138⟩ What is risk?
In probability of the realization of potential for loss or damage or injury.
139⟩ Explain safety in the use of hand trucks?
☛ 1. the truck should be inspected
☛ 2. The axles should be greased well
☛ 3. Safety shoes should be work by the operators.
☛ 4. The load should be balanced and the weight of the load should not fall on the axle
☛ 5. The hard cart should not be wider than the width of the hand truck.
☛ 6. The hard cart should be pushed and not pulled
☛ 7. The truck should not be placed on path ways.
140⟩ Tell me how is audit conducted?
☛ 1. Preliminary visit and understanding the factory
☛ 2. Identify the audit element
☛ 3. Prepare the questionnaire
☛ 4. Get the reply from the company
☛ 5. Discussion with management, executives & workers.
☛ 6. Cross Verification at site
☛ 7. Preparation of report.
